Description
Featuring an 800 hp (563 kW) Caterpillar engine, the RX-700e/ex milling machine is available with either four-track or three-track assemblies. Built with the Roadtec focus on balanced weight distribution, the RX-700e/ex is a heavy duty machine that is user-friendly in both operation and maintenance. The machine cuts up to 14” (35.6 cm) deep. Standard widths are 6’7″ (201cm), 7’2″ (218 cm), 8’2″ (249cm), and 10′ (305cm). Like all Roadtec planers, this model features 60° front load-out conveyor swing.
ACE CONTROL DISPLAY
The user friendly ACE control displays allow the operator and ground crew to easily make changes to the machine’s grade and slope parameters
DUAL WATER SPRAY BARS
Roadtec milling machines have two independent spray bars to inject water in the cutter housing. The front spray bar is primarily for dust suppression, the rear spray bar cools the drum.
SECONDARY CONVEYOR SWING
All Roadtec milling machines offer 60 degree conveyor swing, allowing you to easily feed a truck in an adjacent lane or around a tight bend such as in a cul-de-sac.
THREE TRACK OR FOUR TRACK – IT’S YOUR CHOICE
Both Three Track and four track machines have benefits, so why be forced into one or the other? Roadtec gives you a choice.
FOLDING CONVEYOR
A folding secondary conveyor is available on all Roadtec Milling Machine models to aid in transport and loading.
FRAME
All Roadtec Milling Machines start with an extremely strong frame completely fabricated, welded and assembled by us. This gives us complete control over the design and quality of the build. We are the only manufacturer to use A656 Grade 80 steel throughout the frame. This special grade of steel has twice the strength of the mild steel that is commonly used. This allows us to build a stronger, lighter frame than anybody else in the industry.
DUST EXTRACTION SYSTEM
Standard dust extraction system pulls dust from the primary conveyor and ejects the material along the secondary conveyor into the dump truck.
ACE GRADE AND SLOPE AUTOMATION
ACE™ automates the elevation of the machine through a combination of grade and slope sensors. The ACE option includes three user friendly control panels to be placed at the operator station and at the sides of the machine to make the milling operation as simple and convenient as possible.
Similar models may be shown in addition to the featured model. Equipment may be shown with options.
Specifications are subject to change without prior notice.